Pro Intercom Handset Black with Passive Cradle HH10AB

Description

Pro Intercom Handset Black with Passive Cradle HH10AB
Pro Intercom Handset Black with Passive Cradle HH10AB
The HH10A consists of the hand set with push-to-talk switch, equipped with a US-made coil cord and 4-pin XLR connector, and a wall mount cradle with retaining spring-clip.
The HH10B consists of the same hand set, coil cord and cradle, but the coil cord is wired to the cradle which, in this model, contains a hook-switch to mute the earspeaker when the hand set is “hung up”.
A ten foot cable is wired to the HH10B cradle, with a 4-pin XLR connector for connection to an intercom station.
We recommend the HH10B for quiet environments where the audio from the earspeaker (while the handset is in the cradle) would be a nuisance.
Performance: These heavy duty hand sets are equipped with dynamic transducers suitable for intercom use. To prevent feedback and permit high levels before feedback, the interior of the hand set is
partially filled with a dense mastic material, blocking internal acoustic coupling between the microphone and the earspeaker. A high quality shielded coil cord is then fitted with a genuine Neutrik® connector.
Durability: These handsets are molded from commercial telephone quality compounds No other handset offered for intercom use provides greater resistance to physical damage.
The cradle includes a spring-clip, which prevents the handset from being accidentally, dislodged.
The push-to-talk switch in the handset and the hook switch in the HH10B cradle are rated for millions of cycles.
Value: Pro Intercom offers these high quality handsets at prices com parable to regular imported plastic handsets.
Technical specifications: (Subject to change without notice)
Earspeaker:
Impedance: 150Ω @1kHz
Freq. Response: 200∼3200Hz
Sensitivity: nominal 116dB @ 1kHz
Microphone: (Dynamic)
Impedance: 150Ω @1kHz Freq. Response: 300∼4.5kHz
Sensitivity: nominal 51dB @ 1kHz
Weight: Excluding connector & cra dle - Approx 12.5 oz