M.2 NVMe SSD To PCIe 4.0 X1 Extension Cable M2 Key Expansion Converter Cable

Description

Product model: R14JF 4.0
Product name: M.2 NVMe SSD solid state drive to PCI-E X1 signal transfer cable
Speed bandwidth: PCIe 3.0/4.0 x1 (measured PCIE4.0 read and write about 1400MB/sec, PCIE3.0 read and write about 700MB/sec)
Product function: industrial control server equipment connection, PCIe signal high-speed transmission
Does not support WiFi wireless network card, does not support WWAN, only supports M.2 key M SSD card with NVMe channel
Length description: The length of the wire in this shop refers to the part of the wire, excluding the PCB and the connector.
1. Be sure to recognize the direction when plugging in, do not plug it in reverse or off-position to prevent burning of the device. When plugging in, first hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force. It is forbidden to bend or pull within 2cm of the welding place between the two ends of the wire and the circuit board.
2. The board or motherboard is an electronic device that will age and oxidize with time, and then connecting an extension cord will only make it more unstable. Old devices are not supported. Over 3 years. Please do not buy.
3. Only supports the general version of M.2 NVMe SSD, does not support M.2 WiFi wireless network card, does not support M.2 SATA, does not support Lenovo/HP network card
model
R14JF 4.0
Bandwidth speed (Max.)
PCIe 4.0x1; 16G/bps
SMB_BUS signal direct connection
support
WAKE#Signal direct connection
support
CLKREQ#Signal direct connection
support
Differential signal metal shield
Have