1X 9S GPU Mining Riser

Description

Updated Version of the Old VER 006C Risers - After being tested with a number of Nvidia RTX 30 series and other cards, PCIE risers 009S performed flawlessly, running 24/7 without any problems.
Reliable Risers with LED PCI-E Adapters - 009S provides a safer and more reliable connectivity, with 2 LED indicators on x16 PCIe board, and 1 LED indicator on X1 PCIe small board, to indicate the riser active when the LED lights are red.
More stable and safer PCIe risers - PCIE Riser 009S, including four striking filter capacitors, together with a DC-DC Converter IC, a 100 or 150 μH inductor, plus a MOSFET, constitute a buck and voltage stabilizing circuit, which converts 12V DC input to 3.3V DC output to achieve a more stable working voltage for the graphics card for your Bitcoin Mining.
Extensive Compatibility - PCIe Riser card is compatible with X16 to X1 PCI-e slot of the motherboards, ethereum miner rig, monero mining rig, dedicated for alt coin mining, PCIe Riser mining, other crypto mining frame, case, and air rig complete.
Package Included - Within an anti-static bag, contains 6 sets PCIe Risers, of which every set includes 1 pc PCIe Riser x16 PCBA, 1 pc PCIE x1 adapter board, 1 pc 23.6 inch USB cable, 1 pc 6-pin PCI-E power to 15-pin SATA power cable.
1. Compatible with NVIDIA and AMD GPU for mining, including
Nvidia RTX 3080, NVIDIA RTX 3070, RTX 3060Ti/RTX 3060, Nvidia RTX 1660 6GB Ti
AMD RX 6800 and 6800 XT, AMD Radeon VII, AMD RX 5700 and 5700 XT, AMD RX 5600 XT
2. Compatible with all brands miner boards: ASUS, ASROCK, GIGABYTE, BIOSTAR, MSI, EVGA, INTEL SUPERMICRO, FOXCONN, LENOVO, TOSHIBA, HP, DELL. Typically compatible with below motherboard for Cryptocurrency Mining(BTC), and compatible with below SSD.
ASUS Prime Z390-P LGA1151 + Kingston 120GB A400 SATA 3 2.5" Internal SSD SA400S37/120G
3. PCIE signal need 3.3V voltage for GPUs and other IO device. The PCIE riser adapter will pick up 12V power from a power supply by packed 6PIN to SATA power cable. Two step voltage conversion is to extend pcie riser working life.
Firstly, the on-board voltage coversion chip will pick up 12V power from PSU and convert to 5V.
Secondly, then we designed the voltage control circuit,adjust the 5V voltage to 3.3V and get the 3.3V target voltage. In this way the PCIE riser will consume little power.