1954 Oldsmobile Power Brake Conversion Master Cylinder Booster 98 88 54 olds

Description

This is a complete bolt in power brake kit that uses a modern brake booster and dual circuit master cylinder mounted to the firewall. It bolts in using the original bolt holes for the factory air box and requires absolutely no cutting or drilling. It includes a new brake pedal that swings from a higher location (looks like it could be original too). A modern GM booster and master cylinder give a significantly improved braking feel and power while adding safety through the dual circuit system.
This can be used with factory drums, disc/ drum or disc/ disc. Let me know what brakes you have at check out and I will send the correct proportioning valve.
It will have the pedal feel of a modern car- minimal effort required with a positive and firm feel. No more soft or sloppy pedal!
Installation is fairly straightforward- no cutting of the firewall or drilling is required. This takes about 2 hours to install. You have to remove the driver side air box, master cylinder, original bake pedal, and then these parts simply bolt on to your Oldsmobile.
This is only for a
1954 Oldsmobile
Ninety Eight or Eighty Eight. This fits no other years of Oldsmobiles!
What you get:
New heavy duty Firewall Plate
Brake pedal bracket, goes through air vent hole
Brake pedal W/ Bushings and rubber pad (appearance of a 1970's gm pedal)
GM style brake booster
GM style master cylinder
New high quality bolts
2X 3/16" brake lines- custom cut, bent, and flared
Proportioning Valve + metal lines (mounts beneath MC, pictured)
3/8 Vacuum hose
Misc. hardware
Chrome Parts are available. Brake Booster and Master Cylinder in chrome is +60.
All metal parts are CAD designed and cut on a CNC plasma table for consistent high quality results, then painted in satin black. These parts will have an excellent fit and finish on your 1954 Oldsmobile because they are specifically designed for this particular car. Designed and built in Southwest Washington, USA.